Panasonic KX-MB1500HX, Operating Instructions Manual

Page: 59 / 88

Feature/Code Selection
Setting the memory reception
alert
MBNM 4 NM 3 NM 7 N
To alert you with a beeping sound when a received fax document is stored into
memory.
M 0 N “
OFF
” : Deactivates this feature.
M 1 N “
ON
” (default): You will hear a beeping sound.
Note:
R If documents are stored into memory due to some printing problem, the
beeps will continue until you solve the problem. If a message is displayed,
see page 67 to page 68 for directions on printing out the stored
documents. Make sure the unit is supplied with enough paper to print the
stored document.
Setting friendly reception
MBNM 4 NM 3 NM 8 N
To receive a fax automatically when you answer a call and hear a fax calling
tone (slow beep).
M 0 N “
OFF
” : You have to press M Start N , and then M 2 N for fax reception.
M 1 N “
ON
” (default): You do not have to press M Start N , and then M 2 N for fax
reception.
Receiving a fax into the
computer
MBNM 4 NM 4 NM 2 N
If you wish to receive a fax into a computer, activate this feature and run [PC
FAX] from Multi-Function Station.
M 0 N “
OFF
” : Deactivates this feature.
M 1 N “
ALWAYS
” : If the unit recognizes the connection to the computer, it will
transfer received documents to the computer. If the unit cannot recognize the
connection, it will store received documents into memory, and then transfer the
data after recognition of the computer connection.
M 2 N “
CONNECTED
” (default): If the unit recognizes the connection to the
computer, it will transfer received documents to the computer. If the unit cannot
recognize the connection, it will print the data.
Setting notification of fax
reception
MBNM 4 NM 5 NM 1 N
M 0 N “
OFF
” (default): Deactivates this feature.
M 1 N “
ON
” : The computer connected to your unit using USB will receive a
notification when a fax document is received.
Erasing all received fax
memory
MBNM 4 NM 5 NM 8 N
M 0 N “
NO
” (default)
M 1 N “
YES
”
R Disconnect the telephone line cord and USB cable before activating this
feature.
To erase all received fax:
1.
M Menu N A MBNM 4 NM 5 NM 8 N
2. Press M 1 N to select “
YES
” . A M Set N A M Set N A M Menu N
Resetting fax features to their
default settings
MBNM 4 NM 5 NM 9 N
M 0 N “
NO
” (default)
M 1 N “
YES
”
To reset the fax features:
1.
M Menu N A MBNM 4 NM 5 NM 9 N
2. Press M 1 N to select “
YES
” . A M Set N A M Set N A M Menu N
59
8. Programmable Features