Panasonic KX-MB1500HX Operating Instructions Manual Download Page 20

Page: 20 / 88

2.4 Adjusting the volume
(KX-MB1520/KX-MB1530 only)

Important:

Before adjusting the volume, set the operation
mode to fax mode. If the

Fax

light is OFF, turn

it ON by pressing

Fax

repeatedly.

Set

N MCNMDN

Fax

Ringer volume
While the unit is idle,

press

MCN

MDN

To turn the ringer OFF

Press

MCN

repeatedly to display

“

RINGER OFF= OK?

”

Set

The unit will not ring.

To turn the ringer back ON, press

MDN

Speaker volume
While using the speakerphone,

press

MCN

MDN

2.5 Date and time (KX-MB1520/
KX-MB1530 only)

We recommend you to set the date and time. The other
party will receive your unit’s date and time as the header
information.

Set

N MFNMEN

Menu

Fax

Menu

MBNM

Set

Enter the current date/month/year by selecting 2
digits for each.

Example: 3 August, 2011

Enter the current hour/minute by selecting 2 digits for
each.

Example: 10:15 PM (12 hour clock format)
1.

Press

MGN

repeatedly to select

“

”

Press

MGN

repeatedly to select

“

”

“

”

, or

24-hour time entry.

Set

Press

Menu

to exit.

Note:

To check the current date and time setting,
temporarily change the unit to the fax mode by
pressing

Fax

repeatedly (page 17).

Your unit’s date and time will be used as the header
information for the following:
– When sending faxes (page 38).

If the date and time is not set correctly, the other party
will receive an incorrect date and time as their
header. This may confuse the other party.

The accuracy of the clock is approximately ±60
seconds a month.

To correct a mistake

Press

MFN

MEN

to move the cursor to the incorrect

number, and make the correction.

If you have subscribed to a Caller ID service

The date and time will be automatically set according to
the received caller information.

To use this feature, make sure the time adjustment
is set to

“

AUTO

”

(feature #226 on page 53).

2. Preparation

Summary of Contents for KX-MB1500HX

























































































Search results

Summary of Contents for KX-MB1500HX

Reviews:

Related manuals for KX-MB1500HX

Brands by name

Popular brands

Panasonic KX-MB1500HX, Operating Instructions Manual

Search results

Summary of Contents for KX-MB1500HX

Reviews:

Related manuals for KX-MB1500HX

Brands by name

Popular brands