2.3 Setting the original
2.3.1 Using the scanner glass
A
B
1
Open the document cover (
A
).
2
Place the document FACE DOWN on the scanner
glass (
B
), aligning the top left of the document with
the corner where the mark is positioned.
3
Close the document cover.
Note:
R
Confirm that there are no documents in the automatic
document feeder (KX-MB1530 only).
R
Place the original onto the scanner glass gently. To
avoid malfunction, do not press down too firmly.
R
If the original is a book thicker than 15 mm, do not
close the document cover.
R
Confirm that any ink, paste or correction fluid has
dried completely.
R
Effective scanning area is shown by the shaded area:
Effective scanning area
208 mm
289 mm
4 mm
4 mm
4 mm
4 mm
2.3.2 Using the automatic document feeder
(KX-MB1530 only)
1
Open the document sub tray (
A
) by pressing its
centre part (
B
).
B
A
2
Insert the document (up to 15 pages) FACE DOWN
into the feeder until a single beep is heard.
C
3
Adjust the width of the document guides (
C
) to fit the
actual size of the document.
Note:
R
Do not place the unit in an area where the document
sub tray may be easily bumped into.
R
The order of multiple page documents will be
reversed after being fed through the automatic
18
2. Preparation
Summary of Contents for KX-MB1500HX
Page 88: ...PNQX3909YA C0611KN1012 ...
