Panasonic KX-MB1500HX, Operating Instructions Manual

Page: 44 / 88

press MGN MBN M 9 N (default fax activation code)
firmly .
3. Replace the handset.
Note:
R To stop receiving, see page 65.
R To receive fax documents using the extension
telephone, make sure remote fax activation is turned
ON (feature #434 on page 58) beforehand. The
default setting is ON.
6.7.2 Activating TEL/FAX mode
1
Make sure feature #404 is set to “
TEL/FAX
”
beforehand (page 56).
2
Press M Fax Auto Answer N repeatedly to display
“
TEL/FAX MODE
” .
R The M Fax Auto Answer N light turns OFF.
3
The ringer volume setting should be ON (page 20).
Fax Auto
Answer
M Stop N M SP-Phone N
* The pictured model is KX-MB1520.
How phone calls and faxes are received
1. “
INCOMING CALL
” will be displayed but the unit will
not ring.
2. The unit will wait for the duration of 2 rings before
answering the call.
R The number of rings is determined by the “TEL/
FAX delayed ring count” (feature #212 on
page 56).
R During this time, an extension telephone will ring.
3. The unit will answer the call and try to detect a fax
calling tone.
When a fax calling tone is detected
The unit receives the fax automatically without
ringing.
When a fax calling tone is not detected
A The unit will ring 3 times . You may answer the call.
R To answer the call, press M SP-Phone N and talk to
the other party.
R To answer using another telephone connected to
the
[EXT] jack of this unit, lift the handset, then
press M Stop N on the unit to talk to the other party.
* The pictured model is KX-MB1520.
R To answer using another telephone connected to
the same telephone line as this unit, lift the
handset and press
MGN M 0 N (default auto
disconnection code, feature #435 on page 58)
to talk to the other party.
* The pictured model is KX-MB1520.
44
6. Fax (KX-MB1520/KX-MB1530 only)