Panasonic KX-FT932HK Operating Instructions Manual Download Page 4

Page: 4 / 44

1. Installation and Quick Start

1.4 Recording paper

Open the top cover by pressing the top cover release
button (

Install the recording paper.

Insert the leading edge of the paper into the opening
above the thermal head (

Pull the paper out of the unit.

Make sure that there is no slack in the paper roll.

Close the top cover securely by pushing down on
both sides.

For KX-FT932:

Press

{

FAX/START

}

, then tear off the excess paper

by pulling it towards you.

For KX-FT934:

Press

{

FAX/START

}

to cut the paper.

Quick Start

1.5 Fax sending / Copying

Open the document feeder tray.

Correct

Incorrect

Note:

If the paper is secured with glue or tape, cut
approximately 15 cm from the beginning of the roll
before installing it.

When the power cord is connected, a message is
printed each time the top cover is opened then
closed. If the recording paper is installed upside
down, the message will not be printed. Install the
paper correctly.

For accessory information, see page 3.

{

FAX/START

}

{

FAX/START

}

FT932_934HK-PFQX2561YA-en.book Page 4 Monday, May 8, 2006 5:05 PM

Summary of Contents for KX-FT932HK













































Search results

Summary of Contents for KX-FT932HK

Reviews:

Related manuals for KX-FT932HK

Brands by name

Popular brands

Panasonic KX-FT932HK, Operating Instructions Manual

Search results

Summary of Contents for KX-FT932HK

Reviews:

Related manuals for KX-FT932HK

Brands by name

Popular brands