Panasonic KX-FC231NZ, Operating Instructions Manual, Page: 46 / 114

5. SMS (KX-FC235AL only)
44
5.5.1 Displaying a received
message
1
Press
{j
/OK
}
.
2
Select “
SMS
” , then press
{>}
.
3
To access the public mailbox
Select “
Public
” , then press
{>}
.
To access a private mailbox
Select the desired mailbox, press
{>}
, then
enter its password.
L
If a mailbox contains new (unread) SMS
messages, “
@
” is displayed next to the
total number of messages for that
mailbox.
4
Select “
Receive List
” , then press
{>}
.
5
Press
{e}
or
{v}
repeatedly to select a
message.
L
Messages which have already been read
are indicated by a
Q
, even if they were
read using another handset.
6
Press
{j
/OK
}
to read the message content.
Note:
L
To call the message sender, press
{C}
or
{s}
.
L
If “
SMS Full
” is displayed, new SMS
messages cannot be received. Erase
unnecessary messages (page 43, 44).
L
If you receive a message from a party saved
in the handset phonebook, the stored name
is displayed.
L
Some SMS service providers attach a 1-digit
number to the message sender’s telephone
number. As a result, sender names stored in
the handset phonebook may not be
displayed.
5.5.2 Replying to a message
1
While reading a received message, press
{j
/OK
}
.
2
Select “
Reply
” , then press
{>}
.
3
Enter a message (page 46), then press
{j
/OK
}
.
4
Edit the destination telephone number
and/or press
{j
/OK
}
.
5
Continue from step 9, “5.4.1 Writing and
sending a new message”, page 42.
Editing/forwarding a message
1. While reading a received message, press
{j
/OK
}
.
2. Select “
Edit Message
” , then press
{>}
.
3. Continue from step 5, “5.4.1 Writing and
sending a new message”, page 42.
5.5.3 Erasing received messages
1
While reading a received message, press
{j
/OK
}
.
2
Select “
Erase
” , then press
{>}
.
L
To erase all messages in the selected
mailbox, select
“
Erase All
” , then press
{>}
.
3
Select “
Yes
” , then press
{>}
.
4
Press
{ih}
.
5.5.4 Storing the sender’s
number in the handset
phonebook
1
While reading a received message, press
{j
/OK
}
.
2
Select “
Add Phonebook
” , then press
{>}
.
3
Continue from step 3, “4.3.1 Storing
phonebook items”, page 31.
5.5.5 Editing the sender’s
number before calling back
1
While reading a received message, press
{j
/OK
}
.
2
Select “
Edit and Call
” , then press
{>}
.
3
Edit the number, then press
{C}
or
{s}
.
FC235AL-PFQX2248ZA_en.book Page 44 Monday, June 20, 2005 2:19 PM