Panasonic KX-FC231NZ Page 107 Operating Instructions Manual Download

Page: 107 / 114

14. General Information

105

14 General Information

Printed Reports

14.1 Reference lists and
reports (Base unit only)

You can print out the following lists and reports
for your reference.

“

SETUP LIST

”:

provides you with the current settings of the base
unit programming features (page 67 to page 70).

“

FAX NO. LIST

”:

provides you with names and numbers which are
stored in the base unit phonebook.

“

JOURNAL REPORT

”:

keeps records of fax transmission and reception.
This report can be printed automatically after
every 30 fax communications (feature #22 on
page 68).

“

PRINTER TEST

”:

allows you to check the print quality of your unit.
If the test print has a smudge, or blurred points or
lines, clean the thermal head (page 103).

“

BROADCAST LIST

”:

provides you with names and numbers which are
stored in the broadcast memory (page 50).

“

CALLER ID LIST

”:

keeps records of the last 30 different callers of
the base unit after subscribing to a Caller ID
service. To print automatically after every 30
callers, activate feature #26 (page 68).

Press

{

MENU

}

repeatedly to display

“

PRINT

REPORT

”

Press

{<}

{>}

repeatedly to display the

desired item.

Press

{

SET

}

to start printing.

To stop printing, press

{

STOP

}

2 times.

Press

{

MENU

}

{<}{>}

{

SET

}

{

STOP

}

{

MENU

}

FC235AL-PFQX2248ZA_en.book Page 105 Monday, June 20, 2005 2:19 PM

Summary of Contents for KX-FC231NZ



















































































































Search results

Summary of Contents for KX-FC231NZ

Reviews:

Related manuals for KX-FC231NZ

Brands by name

Popular brands

Panasonic KX-FC231NZ, Operating Instructions Manual

Search results

Summary of Contents for KX-FC231NZ

Reviews:

Related manuals for KX-FC231NZ

Brands by name

Popular brands