Panasonic KX-FC231NZ Operating Instructions Manual Download

Page: 18 / 114

2. Installation

2 Installation

Base Unit

2.1 Ink film installation /
replacement

The included film roll is a starter ink film.

Important:

Remove all blue shipping tape from the
unit before installation.

2.1.1 Installing the ink film

The included film roll is a starter ink film.

Open the front cover by pulling up the centre
part.

Release the back cover by pushing the green
button (

You can also release the back cover by
pushing in the green lever (

Open the back cover.

Insert the front ink film roll by inserting its
blue gear into the left slot of the unit (

Insert the rear ink film roll by inserting its
white gear into the left slot of the unit (

The ink film is safe to touch and will not
rub off on your hands like carbon paper.

Make sure the blue gear (

) and white

gear (

) are installed as shown.

FC235AL-PFQX2248ZA_en.book Page 16 Monday, June 20, 2005 2:19 PM

Summary of Contents for KX-FC231NZ



















































































































Search results

Summary of Contents for KX-FC231NZ

Reviews:

Related manuals for KX-FC231NZ

Brands by name

Popular brands

Panasonic KX-FC231NZ, Operating Instructions Manual

Search results

Summary of Contents for KX-FC231NZ

Reviews:

Related manuals for KX-FC231NZ

Brands by name

Popular brands