Panasonic KX-FC231NZ Operating Instructions Manual Download Page 22

Page: 22 / 114

2. Installation

Handset

2.4 Battery installation /
replacement

2.4.1 Installing the batteries

Insert the batteries negative (

) terminal

first.

Close the handset cover.

2.4.2 Replacing the batteries

flashes even after the handset batteries

have been charged for 7 hours, the batteries
must be replaced.

We recommend the use of

Panasonic batteries.

See page 11 for

accessory information.

Important:

Use only rechargeable batteries. If you
install non-rechargeable batteries and
start charging, the batteries may leak
electrolyte and damage the phone.

Do not mix old and new batteries.

Press the notch on the handset cover firmly
and slide it in the direction of the arrow.

Remove the old batteries positive (

)

terminal first and install the new ones. See
the battery installation procedure.

FC235AL-PFQX2248ZA_en.book Page 20 Monday, June 20, 2005 2:19 PM

Summary of Contents for KX-FC231NZ



















































































































Search results

Summary of Contents for KX-FC231NZ

Reviews:

Panasonic KX-FC231NZ, Operating Instructions Manual, Page: 22 / 114

Search results

Summary of Contents for KX-FC231NZ

Reviews: