KW1M-H Eco-POWER METER
80
9.2 How to mount to DIN rail
(1) Hook ‘A’ of main unit on the upper side of DIN rail.
(2) Making ‘A’ part as a support fit the bottom side of main unit to DIN rail.
(3) It will be completely fixed to DIN rail with a ‘click’ sound.
9.3 How to connect / replace the battery
Be sure to connect the battery included before using the unit.
When starting to use the unit first or passing long time with battery off or changing the setting
for power input type and calendar, initialize the memory by memory initialize mode (Mode4).
If you don’t initialize it, it doesn’t log correctly.
And set the current time by calendar timer setting mode in order to use logging function.
(1) Remove the battery cover.
(2) Insert the connector and put
into the case.
(3) Put the battery cover in.
Battery life is about 2 years; we recommend exchanging battery about 2 years
from the beginning of the use. When battery has abnormal or battery power is
reduced, ‘BATT’ is blinking in the lower line. Please replace the battery
according to the procedures in 1 minute.
In addition, be sure to save logging data in SD memory card before replacing
battery. It may lose the internal memory. When replacing, remove connector
after taking from the case.
After replacing the battery, be sure to initialize the unit memory before using. (Refer to MODE4)
<Note>
Please throw away the replaced battery according to the instruction of your area.
