Panasonic KW1M-H User Manual Download

Page: 62 / 92

KW1M-H Eco-POWER METER

6.4 Demand monitoring mode

During power monitoring mode, hold down <SET> and press <SHIFT/

▽

> to shift to simple demand

monitoring mode.

6.4.1 Demand power display

・

It displays each demand value.

・

Press <SHIFT/

▽

> to shift present demand, estimated demand, demand setting value.

・

On the present demand display, it displays the present time first and displays the present

demand after 1 second.

・

On the estimated demand display, it displays the end time of the demand span first and displays
the estimated demand.

・

Demand setting value is set with DEM1 of mode 1.

[Example]

Present demand

Estimated demand

Demand setting value

After

1 second

After

1 second

After

1 second

・

The present demand is updated every 1 second, the estimated demand is updated every 1 minute.

*At present demand or estimated demand,

[

－－－－－－－－

] is displayed upper and lower

lines for 1 minute after starting the demand span
and when each value exceeds the range.

－－－－－－

] is displayed lower line until when

the next demand span starts,
when you change clock to before demand span
or to next demand span, or at power failure.

Summary of Contents for KW1M-H





























































































Search results

Summary of Contents for KW1M-H

Reviews:

Related manuals for KW1M-H

Brands by name

Popular brands

Panasonic KW1M-H, User Manual

Search results

Summary of Contents for KW1M-H

Reviews:

Related manuals for KW1M-H

Brands by name

Popular brands