KW1M-H Eco-POWER METER
27
4.2.4 MODE4 (Mode for setting of each parameter for optional function)
Auto-off setting mode
OFF
Display LCD turns off automatically when there is no key operation for a long time.
・
Off time can be set the range of 0 to 99min.
‘0’ should be set if you want to turn always light on.
‘1~99’ should be set if you want to turn light off at setting time.
・
After turns off the LCD, any key operation makes it turns on.
・
After turns off the LCD, only power indicator turns on.
Version check mode
VER
Mode to check version of the software.
It displays version of the software.
Saved file type selection mode
FILE
Mode defines file types to write to SD memory card.
・
Select ON and press <SET> for each type 1, 2 and 3, it writes to SD memory card.
・
Select OFF and press <SET> for each type 1, 2, and 3, it doesn’t write to SD memory card.
Type1: Instantaneous value file
Type2: Difference value file
Type3: Instantaneous value in detail file
*Refer to Chapter 5.4 for the detail contents of each file.
*Log cycle is fixed to 1-hour for type 1 and type 2.
Log cycle setting mode
LOG
*Only when ‘ON’ is selected for T3 (type3) on saved file type setting mode.
Mode defines save cycle for type 3 file.
・
Select from 1 / 5 / 10 / 15 / 30 / 60 (min).
It saves measured data with selected cycle.
Calendar timer setting mode
CAL
Mode defines the year, month, day and time.
・
Set year -> month -> date -> hour-> minute ->second.
・
You can set the range of 2000 Jan. 1
st
00:00:00 to 2099 Dec. 31
st
23:59:59.
*Do not set the false date, or it might occur a malfunction.
Initialize memory of the main unit by ‘initialize memory of main unit’ (MODE4) after this setting. When it
is not initialized, it may not display log data correctly.
Initialize memory of main unit
S.FMT
Use to initialize memory of main unit and delete the saved logging data (measured data).
Use when you want to delete the logging data such as changing a measured load and so on.
・
Select OFF and press <SET>, it doesn’t initialize.
・
Select ON and press <SET>, it initialize memory of main unit. Any key doesn’t work during initializing.
*Initialize memory of main unit at the below timing, if it is not initialized, it may not display log data
correctly.
when start using the unit, when it continues power off or no battery.
when change the power input type setting, when change the calendar timer setting
*It doesn’t reset the displayed integrated value.
