Panasonic ISE SMART CONNECT KNX Product Manual Download

Page: 9 / 70

About ISE SMART CONNECT KNX Panasonic

ISE SMART CONNECT KNX Panasonic

1-000C-000

S. 9 / 69

Your messages on the TV

2.3.1 Functional enhancements from updates

Functional enhancements for ISE SMART CONNECT KNX Panasonic are available via a newer version

of the firmware. Simply download the latest firmware and the relevant product manual from our website

www.ise.de.

►

See Updating the firmware via the device website, p. 35.

2.3.2 KNX Secure Ready

• The required FDSK (Factory Default Setup Key) can be found on a sticker on the side of the device

and is also enclosed with the device.

• For maximum security, we recommend removing the sticker from the device.

• Keep the FDSK in a safe place.

• You cannot restore the FDSK yourself.

• Please contact our Support Department if you lose the FDSK despite utmost care.

Is your smart washing machine finished? Movement detected in the garden? Through

self-defined screen texts, you can also choose to display such messages on your TV.

Convenient customisation.

ISE SMART CONNECT KNX Panasonic is prepared for KNX Secure.

Functional enhancements will be provided in a future firmware version.

Summary of Contents for ISE SMART CONNECT KNX







































































Search results

Summary of Contents for ISE SMART CONNECT KNX

Reviews:

Related manuals for ISE SMART CONNECT KNX

Brands by name

Popular brands

Panasonic ISE SMART CONNECT KNX, Product Manual

Search results

Summary of Contents for ISE SMART CONNECT KNX

Reviews:

Related manuals for ISE SMART CONNECT KNX

Brands by name

Popular brands