Commissioning and configuration
ISE SMART CONNECT KNX Panasonic
1-000C-000
© 2019 ise Individuelle Software und Elektronik GmbH
S. 31 / 69
Setting the IP address, IP subnet mask and standard gateway address
1.
In the ETS, select the device in your topology.
2.
Under <<Properties>> select the <<IP>> tab.
3.
You will find the available selection options in figure 18 and table 11, Settings for manual IP
address entry or for receiving automatically, p. 31.
Figure 18: IP settings
Table 11: Settings for manual IP address entry or for receiving automatically
Setting
Description
Receive IP address
automatically
The address data are automatically obtained from a DHCP server on
the data network.
The DHCP server must assign a valid IP address to ISE SMART CON
-
NECT KNX Panasonic.
If you wish to contact a TV device via a host name, the
DHCP server must report a DNS server that can resolve
this host name.
If there is no DHCP server available, the device starts up
after a waiting time with an automatic IP address in the
address range of 169.254.1.0 to 169.254.254.255. As
soon as a DHCP server is available, the device is automati
-
cally assigned a new IP address.
Use a permanent IP
address
Enter the data manually
You can obtain the permitted IP address range and the subnet mask
and standard gateway from the router configuration interface.
