Panasonic ISE SMART CONNECT KNX Product Manual Download

Page: 35 / 70

Commissioning and configuration

ISE SMART CONNECT KNX Panasonic

1-000C-000

S. 35 / 69

Resetting the device to the factory settings via the device website

Open the device website

►

see Calling up the start screen, p. 21.

Select <<System>>

→

<<Factory reset>> in the menu bar.

Confirm the confirmation prompt.

The Start page is displayed as soon as the factory settings have been fully reset.

The device does not have to be restarted.

8.3 Updating firmware

Functional enhancements for ISE SMART CONNECT KNX Panasonic are available via a newer version

of the firmware. The current firmware and corresponding product manual are available on our website

at www.ise.de

So that you can use the new functions, it is necessary for the versions of the firmware being used and

the product database entry are compatible.

8.3.1 Updating the firmware via the device website

You can only import a firmware version that is newer than the current version on the device.

Previous versions cannot be imported.

There are two ways to update:

• Online: Import firmware automatically online.

• Offline: Import firmware offline. For devices without Internet connection in the installation environ

ment.

Import firmware automatically online

Download the current firmware version from www.ise.de

Open the device website.

Select <<Update firmware>>

→

in the <<System>> menu bar.

The system determines which firmware version is currently installed. If a new firmware version is

available for the device, it will be indicated to you.

Select the <<Update firmware>> button.

No compatibility check

The system does not check whether the current configuration is compatible with the new firm

ware. You must check yourself whether the firmware is compatible with the product database

entry.

►

See Compatibility between product database entry and firmware version, p. 36.

Summary of Contents for ISE SMART CONNECT KNX







































































Search results

Summary of Contents for ISE SMART CONNECT KNX

Reviews:

Related manuals for ISE SMART CONNECT KNX

Brands by name

Popular brands

Panasonic ISE SMART CONNECT KNX, Product Manual

Search results

Summary of Contents for ISE SMART CONNECT KNX

Reviews:

Related manuals for ISE SMART CONNECT KNX

Brands by name

Popular brands