Panasonic HC-V760 Operating Instructions Manual Download

Page: 75 / 257

- 75 -

Select the operation icons to add different effects to the images to be recorded.

Touch (left side)/ (right side) of

on the Touch Menu to display the

operation icons. (

)

Touch an operation icon.

(e.g. PRE-REC)

≥

The operation icons that are displayed in the Touch Menu
can be changed. ([SELECT OPERATION ICONS]:

)

≥

Select the operation icon again to cancel the function.
Refer to the respective pages for cancelling the following
functions.

)

)

)

≥

The icon is displayed when the operation icon is set.

Operation icons

*1 Not displayed in Still Picture Recording Mode.
*2 Not displayed in Motion Picture Recording Mode.
*3 It is displayed only when you set the Recording Mode to HDR Movie Mode. (

)

*4 It is displayed only when a headphone is connected to the headphone output terminal. [MIC

LEVEL] (

) is set to anything other than [AUTO],

is displayed as the operation icon,

and adjustment of input level of the microphone is possible.

≥

If you turn off the unit or press the Recording/Playback button,
PRE-REC, Self-timer, Backlight Compensation and Night Mode functions are cancelled.

≥

If you turn off the unit, the Fade function is cancelled.

≥

It is possible to set from the menu.
(Except for the Headphone volume adjustment)

Advanced (Recording)

Recording functions of operation

icons

PRE-REC

Fade

Intelligent Contrast Control

PRE-REC

Self-timer

Intelligent Exposure

Backlight Compensation

*1, 3

Headphone volume adjustment/
Microphone level adjustment

Summary of Contents for HC-V760


































































































































































































































































Search results

Summary of Contents for HC-V760

Reviews:

Related manuals for HC-V760

Brands by name

Popular brands

Panasonic HC-V760, Operating Instructions Manual

Search results

Summary of Contents for HC-V760

Reviews:

Related manuals for HC-V760

Brands by name

Popular brands