Panasonic HC-V760 Operating Instructions Manual Download

Page: 105 / 257

- 105 -

∫

Checking the favourite scenes

Touch the scenes to be played back.

Touch [Add] and add the favourite part.

≥

Approximately 4 seconds before and after touching [Add] will be
added as favourite.

≥

Number of favourite scenes that can be added are 1 to 14.
(Number of scenes that can be added differs depending on the
scenes selected.)

≥

Favourite check display

(

) is displayed in orange, and

favourite check display

is displayed on the slide bar.

≥

To cancel the favourite, play back to the position checked as
favourite, and touch [Cancel].

≥

It is convenient to use Slow-motion Playback and Frame-by-frame
Playback. (

)

Touch

and stop the playback.

≥

It will return to the thumbnail display screen and

is displayed on

the scenes added as favourite scenes.

Touch [Return].

≥

All the scenes checked as favourite may not be played back depending on the playback time
setting. (

106

)

To clear the favourite scenes from the thumbnail display

Touch [Reset].

Touch [RESET ALL] or [RESET SELECTED].

≥

The check on all the favourite scenes will be cleared when [RESET
ALL] is selected.

(When [RESET SELECTED] is selected in Step 2)

Touch the scene to be cleared.

∫

Playing back the favourite scenes

Touch [ON] or [OFF].

∫

Priority settings

Touch [NONE] or [FACE].

≥

If you touch [FACE], priority is given to the part detected as a face.

[ON]:

Include the scenes added in the [FAVOURITE SCENE SETUP] into the Highlight
Playback.

[OFF]:

Do not include the scenes added in the [FAVOURITE SCENE SETUP] into the
Highlight Playback.

0h01m30s





0h01m30s

Summary of Contents for HC-V760


































































































































































































































































Search results

Summary of Contents for HC-V760

Reviews:

Related manuals for HC-V760

Brands by name

Popular brands

Panasonic HC-V760, Operating Instructions Manual

Search results

Summary of Contents for HC-V760

Reviews:

Related manuals for HC-V760

Brands by name

Popular brands