Panasonic HC-V760 Operating Instructions Manual Download

Page: 156 / 257

- 156 -

∫

If the device is Android (non-NFC-compatible) or iOS

Connect the smartphone to a wireless access point.

Press Wi-Fi button on this unit and touch [Remote Ctrl].

≥

It will go into connection standby for remote operation.

Start up the smartphone application “Image App”.

≥

When the connection is complete, images of this unit is displayed on the smartphone screen.

To exit [Remote Ctrl]:

Touch [EXIT] or press Wi-Fi button.

≥

The

message is displayed.

Touch [YES] to close the indication.

≥

After turning off this unit with the LCD monitor, you can also turn on this unit and start the NFC
communication by touching the smartphone on

of this unit. (If you have turned off this unit

with the power button, this unit will not turn on by touching the smartphone on

of this unit)

≥

The following operations allow you to register up to ten smartphones. If the number exceeds ten,
smartphone information with the oldest registration date and time will be deleted.

Touching an NFC-compatible smartphone on this unit.

Setting [Direct Connection Password] to [OFF] and connecting this unit and a smartphone
directly.

≥

Please refer the instructions for the device you are using for information on how to set up and use
a NFC-compatible smartphone.

About [Remote Ctrl]

Smartphone screen shots are example displayed in Motion Picture Recording Mode and Playback
Mode.

Screen display during remote operations

Recording screen

Recording media/remaining recordable
time

Remaining battery power of this unit

Zoom

Photoshot button

Menu display

Playback mode button

Recording mode button

Recording start/stop button

Motion Picture Recording Mode/Still
Picture Recording Mode toggle button

Name of the connected device

XXXXXXXXX

R 1h 20min



















Summary of Contents for HC-V760


































































































































































































































































Search results

Summary of Contents for HC-V760

Reviews:

Related manuals for HC-V760

Brands by name

Popular brands

Panasonic HC-V760, Operating Instructions Manual

Search results

Summary of Contents for HC-V760

Reviews:

Related manuals for HC-V760

Brands by name

Popular brands