Panasonic HC-V760 Operating Instructions Manual Download

Page: 126 / 257

- 126 -

You can combine the relayed scene (

) in the built-in memory and the continued scene in

the SD card to be one into the SD card.

Built-in memory

SD card

Range of Relay Recording

≥

Press the recording/playback button to switch this unit to the Playback Mode, and touch
the play mode select icon. Then, select the AVCHD scene. (

)

Insert the SD card that was used for Relay Recording.

Select the menu.

When the confirmation message appears, touch [YES].

≥

Scene in the built-in memory will be deleted. (Protected scenes in the built-in memory are not
deleted.)

Touch [EXIT] when the relay scene combining complete message is
displayed.

≥

The thumbnail view of the SD card is indicated.

≥

Relay Recording information will be deleted when the relay scenes are combined, and Relay
Recording will be possible again.

≥

When the relayed scenes in the built-in memory or SD card are deleted, combining of the relayed
scenes will not be possible.

Advanced (Playback)

Relay scene combining

[WX970M]/[VX870M]/[V770M]

Relay-recorded scene

Relay scene combining

: [EDIT SCENE]

[RELAY SCENE COMBINE]

MENU

Summary of Contents for HC-V760


































































































































































































































































Search results

Summary of Contents for HC-V760

Reviews:

Related manuals for HC-V760

Brands by name

Popular brands

Panasonic HC-V760, Operating Instructions Manual

Search results

Summary of Contents for HC-V760

Reviews:

Related manuals for HC-V760

Brands by name

Popular brands