Panasonic HC-V760 Operating Instructions Manual Download

Page: 109 / 257

- 109 -

≥

When saving a manually edited scene, check the free space on the SD card.

When saving a manually edited scene, check the free space on the built-in memory.

Before selecting the scene, check the table below and create sufficient free space for saving it.

(Approximate free space requirements for saving a manually edited scene)

≥

“h” is an abbreviation for hour, “min” for minute and “s” for second.

∫

To select a scene

Touch the scene to be played back.

≥

The scene selection is made as you touch it, and the

indication appears on the thumbnail. To

cancel the operation, touch the scene again.

≥

When part of a scene has been selected, the

indication appears on the thumbnail. If you

touch the thumbnail, the scene will be displayed by 3 second thumbnails.

≥

Next (previous) page is displayed by touching

∫

To select part of a scene

Touch [3 sec].

≥

To cancel the operation, touch it again.

Touch the desired scene.

≥

The touched scene is displayed by 3 second thumbnails.

(To select a single thumbnail)

Touch the thumbnail of the part you want to play back.

≥

The thumbnail selection is made as you touch it, and the

indication (white) appears on the

thumbnail. To cancel the selection, touch the thumbnail again.

≥

Next (previous) thumbnail is displayed by touching

≥

Touching [Return] when the thumbnail has been selected returns you to the screen that displays
the thumbnails of scenes. The

indication appears on the thumbnail of the scene

containing the selected part.

Saving format

Total time of an edited

scene

Free space required

[AVCHD 1920

1080/50i]

30 min

Approx. 4 GB

1 h

Approx. 8 GB

[MP4 1280

720/25p]

30 min

Approx. 2 GB

1 h

Approx. 4 GB

[MP4 640

360/25p]

30 min

Approx. 0.4 GB

1 h

Approx. 0.8 GB

WX970 WX979 VX870 VX878

V770 V777 V760

WX970M VX870M

V770M

Summary of Contents for HC-V760


































































































































































































































































Search results

Summary of Contents for HC-V760

Reviews:

Related manuals for HC-V760

Brands by name

Popular brands

Panasonic HC-V760, Operating Instructions Manual

Search results

Summary of Contents for HC-V760

Reviews:

Related manuals for HC-V760

Brands by name

Popular brands