Panasonic HC-V760 Operating Instructions Manual Download

Page: 16 / 257

- 16 -

Use of a non-compatible card may cause recording to stop suddenly.

FULL HD Slow Motion Video Mode (

)

series/

series

4K Photo Mode (

)

series/

series

When [Backup for Twin Camera] is set to [ON] (

)

Inserting/removing an SD card

Caution:
Check that the access lamp has gone off.

Open the SD card cover and insert
(remove) the SD card into (from)
the card slot

≥

Face the label side

in the direction shown

in the illustration and press it straight in as far
as it will go.

≥

Press the centre of the SD card and then pull
it straight out.

Securely close the SD card cover.

≥

Securely close it until it clicks.

≥

Do not touch the terminals on the back of the
SD card.

≥

Do not apply strong shocks, bend, or drop the
SD card.

≥

Electrical noise, static electricity or the failure
of this unit or the SD card may damage or
erase the data stored on the SD card.

≥

When the card access lamp is lit, do not:

Remove the SD card

Turn the unit off

Insert and remove the USB cable

Expose the unit to vibrations or shock

Performing the above while the lamp is on
may result in damage to data/SD card or this
unit.

≥

Do not expose the terminals of the SD card to
water, dirt or dust.

≥

Do not place SD cards in the following areas:

In direct sunlight

In very dusty or humid areas

Near a heater

Locations susceptible to significant
difference in temperature (condensation
can occur.)

Where static electricity or electromagnetic
waves occur

≥

To protect SD cards, return them to their
cases when you are not using them.

≥

About disposing of or giving away the SD
card. (

240

)

When using an SD card not from Panasonic, or one previously used on other equipment, for the
first time on this unit, format the SD card. (

) When the SD card is formatted, all of the

recorded data is deleted. Once the data is deleted, it cannot be restored.

WX970

VX870

WX970

VX870

V770







Access lamp [ACCESS]

≥

When this unit is accessing the SD card or
built-in memory, the access lamp lights up.

Summary of Contents for HC-V760


































































































































































































































































Search results

Summary of Contents for HC-V760

Reviews:

Related manuals for HC-V760

Brands by name

Popular brands

Panasonic HC-V760, Operating Instructions Manual

Search results

Summary of Contents for HC-V760

Reviews:

Related manuals for HC-V760

Brands by name

Popular brands