Panasonic HC-V760 Operating Instructions Manual Download

Page: 170 / 257

- 170 -

Playing back on a TV

You can play back the scenes and still pictures recorded with or stored in this unit on a TV.

≥

The following scenes can be played back:

Scenes recorded in AVCHD

Scenes recorded as Backup for Twin Camera

Scenes recorded in MP4/iFrame [720]

Scenes saved in MP4 (1280

720/25p) or MP4 (640

360/25p)

Press Wi-Fi button on this unit and touch [DLNA Play].

≥

If you touch [Change AP], you can switch the wireless access point to another one that has been
registered to this unit.

≥

If you touch [CANCEL], the Wi-Fi connection is cancelled.

≥

When the connection is complete, the screen of this unit turns off. To display it again, touch the
screen.

Select this unit (SSID) by the TV side.

≥

Select the media ([SD/MEM]) and select the motion picture ([AVCHD/MP4]) or still picture
([JPEG]) to play back.

Perform playback operations with the TV remote control.

≥

Playback operations may differ depending on the TV in use.

≥

The following operations can be performed if a colour button
is pushed.
Blue/Red: Skip playback

≥

Fast forward/Fast rewind playback cannot be performed.

≥

You cannot perform playback operations with this unit.

To exit [DLNA Play]:

Touch [EXIT] or press Wi-Fi button.

≥

A message is displayed. Touch [YES] to exit.

≥

You cannot play back the following scenes:

series/

series

Scenes recorded in 4K MP4

Scenes recorded with [1080/50M], [1080/28M] or [iFrame] of [MP4/iFrame]

Scenes saved in MP4 (1920

1080/25p)

≥

Depending on your environment, such as the network condition, scenes may not be played back
smoothly.







(Examples of operations during
motion picture playback)

Skip playback

Stop

Playback/Pause

WX970

VX870

Summary of Contents for HC-V760


































































































































































































































































Search results

Summary of Contents for HC-V760

Reviews:

Related manuals for HC-V760

Brands by name

Popular brands

Panasonic HC-V760, Operating Instructions Manual

Search results

Summary of Contents for HC-V760

Reviews:

Related manuals for HC-V760

Brands by name

Popular brands