Panasonic HC-V760 Operating Instructions Manual Download

Page: 140 / 257

- 140 -

Simple copy

Connect this unit to the USB HDD to prepare for copying. (

137

)

Touch [Simple copy].

≥

When [Copy selected files] or [Playback HDD] is selected, terminate the connection with the USB
HDD (

141

), and then perform the operation of Step 1.

Touch the media you want to copy.

Touch [YES].

Touch [EXIT] when the copy complete message is displayed.

≥

The thumbnail view of the copy destination is indicated.

When you stop copying halfway:

Touch [CANCEL] while copying.

Copy selected files

Connect this unit to the USB HDD to prepare for copying. (

137

)

Touch [Copy selected files].

≥

You can also copy scenes or still pictures by touching

, selecting [COPY].

Touch [NEXT].

Touch the media you want to copy.

≥

Please refer to page

134

for information on copying files between the SD card/built-in memory.

Touch the desired items following the instructions on the screen.

≥

It will return to the previous step by touching

≥

(When [SELECT SCENES] is selected)
When touched, the scene/still picture is selected and the

indication appears on the

thumbnail. Touch the scene/still picture again to cancel the operation.

≥

(When [SELECT DATE] is selected)
When touched, the date is selected and surrounded by red. Touch the date again to cancel the
operation.

≥

Up to 99 scenes/ 99 dates can be selected continuously.

Touch [EXIT] when the copy complete message is displayed.

≥

The thumbnail view of the copy destination is indicated.

When you stop copying halfway:

Touch [CANCEL] while copying.

[

When copying from the SD card to the USB HDD.

[

When copying from the built-in memory to the USB HDD.

WX970M VX870M

V770M

MENU

WX970 WX979 VX870 VX878

V770 V777 V760

WX970M VX870M

V770M

Summary of Contents for HC-V760


































































































































































































































































Search results

Summary of Contents for HC-V760

Reviews:

Related manuals for HC-V760

Brands by name

Popular brands

Panasonic HC-V760, Operating Instructions Manual

Search results

Summary of Contents for HC-V760

Reviews:

Related manuals for HC-V760

Brands by name

Popular brands