Panasonic HC-V760 Operating Instructions Manual Download

Page: 78 / 257

- 78 -

It is possible to record with illumination even in dark places.

Each time the icon is selected, the indication changes by one setting in the following order.

In motion picture recording mode:

([ON])

([AUTO])

([OFF])

In still picture recording mode:

([ON])

([OFF])

≥

When the battery is low and the light cannot be lit, the

will be displayed on the screen.

≥

When set to

, the video light turns on in Low Light Mode in Intelligent Auto Mode.

≥

When the video light is in use, the recordable time when using the battery is shortened.

≥

When the battery level is low, the video light may turn off or may not turn on.

≥

Do not use with Filter Kit (optional) or Conversion Lens (optional) attached.

≥

The (approximate) available range of the video light is approximately up to 1.2 m.

≥

series/

series

Using the Night Mode ([COLOUR]) function at the same time will make conditions even brighter.

≥

series/

Using the Night Mode function at the same time will make conditions even brighter.

You can record images even in very low light situations (minimum required illumination:
approx. 1 lx) or in the dark.

series/

series

Each time the icon is selected, the indication changes by one setting in the following order:

([COLOUR])

([Infrared])*

[OFF]

* This icon is not displayed in the following cases:

When [WIDE CONV. LENS SET] is set to [ON]

When the Sub Window is displayed in Twin Camera

∫

To set ON/OFF of the infrared light for

([Infrared])

≥

When

is displayed after you set the item to [ON], you can record images in the dark.

≥

When you are in a dim place or in other situations where it is difficult to focus with Auto Focus, set
the item to [OFF].

≥

If you turn off and on this unit, [INFRARED LIGHT] will be set to [ON].

Video light

Always on.

Turns on/off automatically according to brightness of the surroundings.

Cancel the setting.

Night Mode

([COLOUR]):

Allows you to record colour images in very low light situations.

([Infrared])*:

Allows you to record images in the dark.

OFF:

Cancel the setting.

: [RECORD SETUP]

[INFRARED LIGHT]

[ON] or [OFF]

WX970

VX870

V770

V760

WX970

VX870

MENU

Summary of Contents for HC-V760


































































































































































































































































Search results

Summary of Contents for HC-V760

Reviews:

Related manuals for HC-V760

Brands by name

Popular brands

Panasonic HC-V760, Operating Instructions Manual

Search results

Summary of Contents for HC-V760

Reviews:

Related manuals for HC-V760

Brands by name

Popular brands