Panasonic FP? Positioning Unit RTEX, Technical Manual

Page: 84 / 288

7-32
7.13
46B
Checking Settings
7.13.1
111B
Checking Parameters and Data Values
Collectively check the parameter setting first and then the positioning data if the values are within the
range. If an error is found in the parameter setting, the parameter setting dialog is automatically indicated
and the position where the error exists is focused. Also, if an error is found in the positioning data, the
cursor moves to the position where the error exists.
Select [Debug]
→
[Check Parameters and Data] in the menu bar, or click the [Check Parameter
and Data] icon in the toolbar.
Verifying File Contents
Verify the file currently being edited, and the files on the disk or the information in the unit. The following
procedure is for the verification with the files on the disk.
Verify the axis information, parameters and positioning data collectively.
Select [Debug]
→
[Verify]
→
[File] in the menu bar.
The dialog to select the file to verify is shown as below. Select the file to verify.
The contents of the file currently being edited are verified with the selected file and the result is indicated
in the dialog below.
Click [Close] to close the dialog.