Panasonic FP? Positioning Unit RTEX, Technical Manual

Page: 74 / 288

7-22
Parameter name Description
J point control -
Acceleration/Deceleration pattern Acceleration pattern in the J point (speed point) operation.
J point control - Acceleration time
(ms) Acceleration time in the J point (acceleration point) operation.
J point control - Deceleration time
(ms) Deceleration time in the J point (acceleration point) operation.
J point control - Target speed Target speed in the J point (acceleration point) operation.
Pulser operation setting code The pulser input (1 to 3) in the pulser operation.
Pulser input method Input method in the pulser operation
Pulser operation ratio numerator No. of movement pulse is calculated by multiplying the No. of
input pulse from the pulser by the ratio below.
(Numerator of ratio of pulser operation)/(Denominator of ratio of
pulser operation)
Pulser operation ratio denominator
Pulser operation target speed Maximum operation speed of pulser operation
OK Update the parameter settings with the specified contents.
Cancel
Close this dialog without updating the parameter settings.
Copy axis
Specify the axes of the source and destination to copy the parameter setting
between the axes. The following dialog is shown by clicking the [Copy axis]
button. Specify the axes and click [OK].
Initialize Initialize the parameter settings.
Help Indicate the help for this function.
3. Click [OK] to determine the settings.
Click [OK] to determine the edited settings.
Click [Cancel] to cancel the edited settings.