manualshive.com logo in svg

Panasonic FP-7818, Service Manual & Parts Manual

Share
Download
Panasonic FP-7818 Service Manual & Parts Manual Download Page 345

Unpacking/

Installation

6-5

Location

Procedure

Check

5

(1) Remove the upper cassette rail

fixing screw. (front side X 1)

(2) Install the sorter receiving bracket

(front), together with the upper

cassette rail.

(1 screw just removed)

6

Re-install the upper cassette/ADU

and rail stopper.

7

(1) Re-install the left cover and rear

cover.

(2) Close the exit door and front door.

(3) When the ADU is installed:

Re-install the waste toner bottle

then re-install the right cover.

8

Remove the system console left

cover. (2 screws)

1

2

9

Install the system console support

brackets.

(front and rear, 4 screws, M4 X 8)

Sorter receiving bracket (front)

Summary of Contents for FP-7818



















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands