Panasonic Firetracker FT128, Operation Manual

Page: 16 / 150

Operation Manual
FT128 Rev 2.4
16

Two 24 V DC outputs (power supply outputs for routing equipment and
external equipment). See Dwg. F665.

A socket for an optional Communication module (RS485 transceiver
component) 4552, which will provide an RS485 interface (serial line) for up to
eight Display Units. See Dwg. F665.

RS232 interface ("D" connector) for a PC with EBLWin. See Dwg. F665.

RS232 interface for a Web-server 1598. See Dwg. F665.

24 V DC power supply output for a Web-server II 1598. See Dwg. F665.
•
Built-in power supply and space for back-up batteries. See Dwg. F665.
•
Space for optional expansion board holder. Up to four expansion boards can be
mounted in the holder.
•
Space and mounting bracket for different routing equipment (optional).
•
DIN rail for Web-server II 1598 (optional.
3.4
Front Display
Figure 3 The FT128 Front, FBP (upper black part) and CP (lower grey part)
An alphanumeric display is provided to view which alarm point / zone has generated a fire
alarm(s). In the alphanumeric display (LCD, 2x40 characters), the information displayed
on the first row depends on how many alarm points / zones have generated fire alarm (and
also convention). On the second row, a user definable text message is shown for an alarm
point or a zone, if programmed. See chapter "Fire alarm", page 50.
Fire services personnel use the FBP in FT128 to take operational control of the system.
The CP is used to "communicate" with FT128, e.g. for commissioning, monthly tests,
maintenance, etc. Access codes for different users and access levels are required. A
keypad is used to get access to the menu tree, i.e. the main and sub menus for data input
/ output and manoeuvres, etc. The CP also holds several system status LEDs.