Operation Manual
FT128 Rev 2.4
122
Action
Text in display
Comments
"2"
"A"
End test mode zone: 01
ACCEPT? L
This is a list in which you can
scroll between all the zones
in test mode. Select or type
the zone number and press
"A". When no more zones
are in test mode
--- List is empty ---
will be shown and the LED
"Test mode" (L9) is turned
OFF. Press "Return" to D2.
--- List is empty ---
"Return"
End zone in test mode
ACCEPT? D2
Press return to H7
"Return"
Perform zone test
ACCEPT? H7
Notes:
If an alarm point (e.g. a manual call point) is in alarm state when the test mode is ended,
there will be a fire alarm activated.
When the "Fire door closing" function is used, the fire door(s) will be closed when the
zone involved is set in test mode.
Summary of Contents for Firetracker FT128
