Panasonic Firetracker FT128, Operation Manual

Page: 15 / 150

Operation Manual
FT128 Rev 2.4
15
3.3
FT128 FDCIE Layout
Figure 2 Standard FT128
The FT128 control and indicating equipment (FDCIE) is housed in a metal cabinet powder
coated oyster colour. The cabinet has an inner and outer door. The outer door is fitted with
a 003 key to provide access level 1 and is made of tinted high impact plastic and allows
easy viewing of all indicators and controls.
Access to the inner door is gained by first opening the outer door which then provides
access to the inner door fixing screws.
Opening the inner door allows access to the control unit hardware for the purpose of
maintenance or servicing.
Figure 2 shows the standard FT128 in the medium size cabinet fitted with only one option
(OWS). Other options e.g. AS1668 Fan Control, Zone Control, etc, can also be fitted
depending on the space available on the front face plates.
Each FT128 has the following basic configuration:
•
Metal cabinet powder coated oyster with smoky acrylic door as shown in Figure 2,
larger cabinet sizes also available.
•
Main board (4556). See Dwg. F665.

One COM loop (0) to which the loop units are connected. See Dwg. F665.

Two programmable supervised voltage outputs (S0-S1). See Dwg. F665.

One programmable relay output (R0). See Dwg. F665.

One non-programmable relay output for routing equipment (Fault condition
output for Fault tx). See Dwg. F665.

One programmable inputs (I0). Supervised when required. See Dwg. F665.