Panasonic DA-PC700, Operating Instructions Manual

Page: 74 / 262

60
4
4.3 Configuring the Printer Drivers
Output Options
For Windows 95/98/Me For Windows NT 4.0/Windows 2000
The "Output Options" tab has some advanced features for sending a print job. There is an
image display of the Collate Settings which represents the current selection. Clicking this
image will toggle both the check box setting and the image display between the collate and
uncollate selections. Image displays of the Staple Position and Punch Position will be
shown only when they are selected. Each click on these images will select the next item in
their combo box and update the image displays as well.
Collate Settings
Specify how you want your document to be arranged.
Collate (default: on)
Click on the check box to collate or uncollate your documents. Enabled if more than
one copy is selected for Copies on the "Paper/Output" tab.
Finishing
Specify where to staple and punch your printed document. The Staple Position and Punch
Position drop-down lists are enabled only if all of the following conditions are met:
(1) Finisher is selected for Paper Output Options on the "Printer" tab;
(2) Finisher Tray 2 is selected for Output Destination on the "Paper/Output" tab;
(3) Collate is selected for Collate Settings; &
(4) Booklet Creation is not selected for Layout Mode on the "Layout" tab.
Staple Position
Specify the staple positions around the paper edge which can be used for stapling:
• None (default)
Staple function off.
• Top Left Corner
Apply one staple at the top-left corner of paper.
• Top Double
Apply two staples at the top edge of paper.