Panasonic BB-HNP15A Operating Instructions Manual Download

Page: 32 / 169

Operating Instructions

Setting the alarm/sensor detection method

You can set an alarm/sensor detection method for cameras that have an alarm/
sensor attached.

Alarm/sensor recording can only be enabled for cameras set to the JPEG format
(see page 25).

If the camera is set to MPEG-4 format, change the setting to JPEG format, then
configure the alarm/sensor.

Alarm/Sensor Page

Setting

Description

Set the Alarm1/
Sensor Recording /
Set the Alarm2
Recording

After you select the check box, recording will start when the
camera detects a signal.
• If the camera is set to the MPEG-4 format (see page 25), the

following message will be displayed. Click [OK] to change to
the JPEG format.

• Select [Sensor] for sensor supported cameras.

Summary of Contents for BB-HNP15A










































































































































































Search results

Summary of Contents for BB-HNP15A

Reviews:

Related manuals for BB-HNP15A

Brands by name

Popular brands

Panasonic BB-HNP15A, Operating Instructions Manual

Search results

Summary of Contents for BB-HNP15A

Reviews:

Related manuals for BB-HNP15A

Brands by name

Popular brands