Panasonic BB-HNP15A Operating Instructions Manual Download

Page: 96 / 169

Operating Instructions

Select the destination folder, enter a file name and click [Save].

• Conversion is started.

• When the conversion is completed successfully, the following window is

displayed.

Note

• The file name is set to the start time and end time+1 second of the first image

by default.

• A confirmation screen is displayed if a file with the same name already exists.

To overwrite the existing file, click [Yes]. To save the file under a different
name, click [No], then enter a different file name.

• The file extensions are determined by converted file formats (mpg, avi, asf,

wav).

• The converted image can be played back with Windows Media Player

(Version 9.0 or later).

• If conversion is canceled, images that were converted are not saved.

Summary of Contents for BB-HNP15A










































































































































































Search results

Summary of Contents for BB-HNP15A

Reviews:

Related manuals for BB-HNP15A

Brands by name

Popular brands

Panasonic BB-HNP15A, Operating Instructions Manual

Search results

Summary of Contents for BB-HNP15A

Reviews:

Related manuals for BB-HNP15A

Brands by name

Popular brands