Panasonic BB-HNP15A Operating Instructions Manual Download

Page: 98 / 169

Operating Instructions

Select the destination folder, and click [OK].

• Conversion is started.

• When the conversion is completed successfully, the following window is

displayed.

Note

• The file name for each selected image is set to its start time and end time+1

second.

• If files have the same name, _XXX is appended to the end of the file name.

XXX is a 3-digit number in the range 001 - 999.

• The file extensions are determined by converted file formats (mpg, avi, asf,

wav).

• The converted image can be played back with Windows Media Player

(Version 9.0 or later).

• If conversion is canceled, images that were converted are not saved.

Summary of Contents for BB-HNP15A










































































































































































Search results

Summary of Contents for BB-HNP15A

Reviews:

Related manuals for BB-HNP15A

Brands by name

Popular brands

Panasonic BB-HNP15A, Operating Instructions Manual

Search results

Summary of Contents for BB-HNP15A

Reviews:

Related manuals for BB-HNP15A

Brands by name

Popular brands