Panasonic BB-HNP15A Operating Instructions Manual Download

Page: 75 / 169

Operating Instructions

Playback button

Note

• You can rearrange the images on the multi-playback page by dragging and

dropping the images (see

page 85

). When you restart this software, the

original order is restored.

• The settings (camera name, recording time, frame rate display, number of

screens in a window, multi-playback page layout, etc.) can be changed for the
multi-playback page on the preference page (see

page 87

• If there are overlapping recordings on the same camera, the images are

played back in the order in which they were recorded.

Pause playback.

The button is changed to

during pause.

• To start playback again, click

Stop playback.

Displays the image at the playback start time.

Display a previous image from the displayed image.

Reverse playback.

Start playback.

Display a next image from the displayed image.

Displays the image at the playback end time.

(Alarm detection recording

with timer)

Camera name

East side

Images are displayed in the order to .

(Motion detection recording with timer)

(Full time recording with timer)

(Full time recording)

Camera name

East side

Summary of Contents for BB-HNP15A










































































































































































Search results

Summary of Contents for BB-HNP15A

Reviews:

Related manuals for BB-HNP15A

Brands by name

Popular brands

Panasonic BB-HNP15A, Operating Instructions Manual

Search results

Summary of Contents for BB-HNP15A

Reviews:

Related manuals for BB-HNP15A

Brands by name

Popular brands