Panasonic BB-HNP15A Operating Instructions Manual Download

Page: 55 / 169

Operating Instructions

Using Preset Buttons/Preset List

The camera preset buttons/preset list can be used.
Clicking home position/preset buttons (1-8) or selecting the list changes position to
registered position.

• Registered buttons are displayed blue.

• Unregistered buttons are displayed gray.

Click the preset number or select the preset list.

• When clicking a preset button, the preset name

appears.

Note

• If the preset button is changed while this software is being used, the change

is not reflected on this software.

Clicking [Refresh] displays the latest preset buttons.

• The preset list may not be displayed depending on the camera.

Left End

Summary of Contents for BB-HNP15A










































































































































































Search results

Summary of Contents for BB-HNP15A

Reviews:

Related manuals for BB-HNP15A

Brands by name

Popular brands

Panasonic BB-HNP15A, Operating Instructions Manual

Search results

Summary of Contents for BB-HNP15A

Reviews:

Related manuals for BB-HNP15A

Brands by name

Popular brands