Panasonic BB-HNP15A, Operating Instructions Manual

Page: 57 / 169

Operating Instructions
57
2.4.2 Recording All Images
This software allows you to record all images.
Recording is operated with the settings that are configured on the image settings
page (see page 24).
1.
Select the camera to record from the multi-monitoring page.
• A red frame is displayed around the selected camera.
• To select multiple cameras, click the camera images while holding down the
[Ctrl] key. A blue frame is displayed around the selected cameras.
(A red frame is displayed around the focus camera.)
See page 77 instructions on selecting cameras.
2.
Click .
• The focus camera and other selected cameras start recording.
• is displayed in the upper-right portion of the screen for cameras that are
record (see page 56).
• To stop recording, select a camera to stop and click .
• You can select [Start Recording] or [Stop Recording] from the [Recording]
on the menu bar.
Note
• See page 16 for the estimated file sizes of recorded images.
• When you want to stop recording, always click , or select [Recording]-
[Stop Recording]. If you close the operation window, timer recording will not
stop.
When is displayed in the notification area, the recording software is
running (see page 9).
• If the network is disconnected during recording, timer recording will be
paused, but the recording icon will still be displayed. Recording starts again
when the network is reconnected.