Operating Instructions
153
Record
The receiving frame rate from the
camera is low and cannot keep the
recording frequency. Recording
has not been stopped, but the
recorded images will not match to
the recording frequency setting.
This message will be displayed
again in the same occasion. If you
don’t need to display this message
again, uncheck the “Display the
error message if the program does
not work in the specified
frequency” in image settings.
→
Follow the instruction message.
**** has reached its recording
capacity. Delete recorded images.
**** =
• Camera Name
• Destination Folder
• The recorded images of the camera or
recorded images of the destination folder have
reached the limit of recording capacity and
recording is stopped.
→
Delete the recorded images of the camera,
or increase the recording capacity.
→
Change the limit of recording capacity and
select [Delete old files and keep recording]
(by 1 minute).
Recording cannot be started
because **** has disabled the
camera. Enable the camera in
order to start recording.
• **** = Camera Name
• The camera is disabled. (The disabled camera
cannot be recorded.)
→
Follow the instruction message.
Message
Cause and Remedy
Summary of Contents for BB-HNP15A
Page 168: ...Operating Instructions 168 ...
