20
1. Refer to the Operating Instructions of the WV-Q105A direct ceiling mount bracket, and
attach the WV-Q105A as well as the drop-prevention wire angle and drop-prevention wire
supplied with the WV-Q105A to the anchor bolts.
2. First, remove the screws which were loosely fastened in step 1, and then align the camera
mount bracket of the AW-HE20 with the screw holes in the WV-Q105A direct ceiling mount
bracket and mount it in place.
Use the mounting screws (the M4-L60 Phillips head screws with adhesive) supplied with the
WV-Q105A as the mounting screws.
Fasten the AC adaptor securely to the bottom or other surface of the reinforcing member made of
channel steel where dust and other foreign matter will not accumulate.
Do not place the AC adaptor directly onto the ceiling panel or other such surface.
3. Install the AW-HE20 camera by following the procedure starting with step 3 on page 15.
When installing the unit on a ceiling
Mounting the anchor bolts and direct ceiling mount bracket (
*
)
This job is facilitated if the direct ceiling mount bracket is loosely secured to the ceiling panel in
one place, and the direct ceiling mount bracket and anchor bolts are vertically aligned before the
nuts are tightened up.