69
Maintenance
Turn off the unit’s power before proceeding
with maintenance. Otherwise, you may
injure yourself. Wipe the surfaces using a
soft dry cloth. Avoid all contact with
benzene, paint thinners and other volatile
substances, and avoid using these
substances. Otherwise, the casing may
become discolored.
Do not use the unit in oily-smoky
or dusty places.
Performance may be adversely affected if
small particles or other foreign objects get
inside the product.
Take extra care in environments where a
special effect such as theatrical smoke is
used.
Do not allow foreign matter to
make contact with the rotating
parts.
Failure to obey may cause the unit to
malfunction.
Use the unit in an environment
with minimal moisture and dust.
Avoid using the unit in an environment with
high concentration of moisture or dust since
these conditions will damage the internal
parts.
Zooming and focusing
When the focus is set manually,
out-of-focusing may occur during zooming.
After zooming, if necessary, either adjust the
focus or set the focus to auto.
When using the focus at the manual setting,
proceed with zooming after setting the focus
position at the Tele end where the focusing
accuracy is higher. (However, if the distance
form the unit to the object is less than 1.5
meters (4.9 ft), the subject may shift out of
focus at the Wide end.)
If zooming is performed to the Tele end after
having adjusted the focus at the Wide end,
out-of-focusing may occur.
About the operation sound of
pan/tilt
When pan/tilt is being operated, the
operation sound is louder at high speed
compare with that at low speed.
For environment with operation sound
concern, operate the pan/tilt at a low speed.
