82
3
Click the MAC address/IPv4 address of the camera to be set, and click the
[Network settings] button.
When a DHCP server is being used, the IP address allocated to the unit can be checked by
clicking the [Search] button of the EasyIP Setup Tool Plus Software.
If the same IP address is used for any additional cameras, the numbers of the additional
cameras will be displayed in the “IPv4 overlap” column of the cameras concerned.
When the [Web GUI] button is clicked, the Live screen of the selected camera is displayed.
The screen display of EasyIP Setup Tool Plus may vary by its version.
4
Input the network items, and click the [Setup] button.
When a DHCP server is being used, [DNS] of the EasyIP Setup Tool Plus Software can be set to
[Auto].
After the [Setup] button is clicked, it takes about 1 minute for the settings in the unit to be
completed.
If the AC adaptor or LAN cable is disconnected before the settings are completed, the settings will
be canceled. In this case, repeat the steps to establish the settings.
When a firewall (including software) has been introduced, enable access to all the UDP ports.