81
Use the EasyIP Setup Tool Plus Software to Establish the Unit’s
Settings
The settings related to the unit’s network can be established using the EasyIP Setup Tool Plus
Software. You can obtain EasyIP Setup Tool Plus Software (EasyIPSetupToolPlus.exe) by
downloading it from the following website:
https://pro-av.panasonic.net/
To establish the settings for a multiple number of units, the settings must be selected for each
camera involved.
If the settings cannot be established using the EasyIP Setup Tool Plus Software, select the settings
separately for the unit and personal computer on the network page of the setting menu. For further
details, refer to the “Operating Instructions — <Operations and Settings>” (PDF file).
[Note]
If, after the network settings have been established, another device in the same network has the
same IP address, the network operations will not be performed properly.
Set the IP address in such a way that it does not duplicate an existing IP address.
Do not establish network settings from a multiple number of EasyIP Setup Tool Plus Software
programs at the same time for a single camera. Similarly, do not perform the "Auto IP setting"
operation of the remote camera controller AW-RP150 or AW-RP60 at the same time. The IP
address settings may no longer be recognized as a result.
To enhance the security of the EasyIP Setup Tool Plus Software, it will not be possible to make
network settings for the target camera once about 20 minutes or more have elapsed after turning
the power of the camera on. (When the [Easy IP Setup accommodate period] setting is [20min].
The EasyIP Setup Tool Plus Software cannot be used from a different subnet via a router.
1
Double-click EasyIPSetupToolPlus.exe to start the EasyIP Setup Tool Plus
Software.
2
Click the [Search] button.
