- 83 -
≥
Area Function is not possible in following cases:
j
In Variable Frame Rate Mode (
)
j
When a remote control (commercially-available) is connected (
)
≥
Area mode is canceled in following cases:
j
If you turn the unit off
j
If you press the THUMBNAIL button
j
When you set [REC FORMAT] to [4K 2160/24.00p 100M] (
)
j
When you set [OUTPUT FORMAT] to [4K 2160/24.00p] (
j
When the setting of [ASPECT CONVERT] is changed (
j
When [USB MODE SELECT] is set to [DEVICE] and this unit is connected to a PC. (
≥
When using Area Mode, even if you set [ZEBRA] to [MARKER], the luminance display frame will
not be displayed. (
)
In addition, the luminance level will not be displayed if [AREA MODE] is set to [FOCUS], [IRIS] or
[FOCUS/IRIS].
≥
Register “Focus Transition” to a USER button. (
≥
Switch to Manual Focus Mode. (
)
With Focus Transition, you can move the current focus position to a pre-registered focus position.
(
)
≥
Register “Capture” to a USER button. (
You can record still pictures or create still pictures from recorded motion pictures. (
)
≥
Register “EVF/LCD detail” to a USER button. (
[EVF/LCD DETAIL] helps you achieve focus easier by emphasizing the outlines of an image
displayed on the LCD monitor or the viewfinder. (
)
≥
These settings will not affect the images actually recorded.
Focus Transition
Capture
EVF/LCD detail