- 52 -
Focus Transition
You can use Focus Transition by registering “Focus Transition” to a USER button. With Focus
Transition, you can shift the current focus position to a pre-registered focus position.
≥
for details about setting the USER button.
To use Focus Transition, you need to register a focus position.
≥
You can register up to 3 focus positions.
≥
Switch to Manual Focus Mode. (
)
1
Select the menu.
2
Touch the item to which you want to register the focus position.
≥
You can select the item by pressing the USER buttons 1-3.
≥
The Focus Assist screen will be displayed.
≥
The screen may not be magnified depending on your settings.
3
Adjust the focus by rotating the focus ring.
4
Touch [ENTER].
≥
The icon of the item to which the focus position has been registered will be highlighted in yellow.
≥
To select a different item, perform the operations in Steps 2
s
4.
5
Touch [EXIT] to complete the setting.
≥
The focus positions of the items you have set will be registered.
≥
This function is not available in the following cases:
j
When Auto Focus is used
j
During Freeze Frame (
j
In Variable Frame Rate Mode (
)
≥
The focus position settings are canceled in the following cases:
j
If you turn the unit off
j
If you press the THUMBNAIL button
j
If you operate the zoom
Registering a focus position
: [RECORD SETUP]
#
[FOCUS TRANSITION]
#
[SET]
[1]/[2]/[3]
MENU
