Panasonic AG-DVX200AN Operating Instructions Manual Download

Page: 18 / 203

- 18 -

Charging and recording time

≥

The times given apply when the ambient operating temperature is 20

C (68

F) and the relative

operating humidity is 60%. Charging time may be longer at other temperatures and humidity
levels.

≥

The continuous recordable time given applies under the conditions below. The time becomes
shorter under other conditions.

The LCD monitor is open

A cable is not inserted to the external output terminal

≥

“h” is an abbreviation for hour, “min” for minute and “s” for second.

≥

These times are approximations.

≥

The indicated charging time is for when the battery has been discharged completely.
Charging time and recordable time vary depending on the usage conditions such as high/
low temperature.

≥

The batteries heat up after use or charging. This is not a malfunction.

Charging/Recording time

Battery model number

Voltage/Capacity

(minimum)

Charging time

Continuously recordable

time

Supplied battery/

VW-VBD58 (optional)

7.2 V/5800 mAh

380 min

150 min

Summary of Contents for AG-DVX200AN












































































































































































































Search results

Summary of Contents for AG-DVX200AN

Reviews:

Related manuals for AG-DVX200AN

Brands by name

Popular brands

Panasonic AG-DVX200AN, Operating Instructions Manual

Search results

Summary of Contents for AG-DVX200AN

Reviews:

Related manuals for AG-DVX200AN

Brands by name

Popular brands