Panasonic AG-DVX200AN Operating Instructions Manual Download Page 26

Page: 26 / 203

- 26 -

∫

About the operation icons

Touch when changing a page or performing settings.

≥

Do not touch the LCD monitor with hard pointed tips, such as ball point pens.

LCD monitor adjustment

≥

These settings will not affect the images actually recorded.

Brightness of the LCD monitor can be switched.

Select the menu. (

)

≥

[LOW] is selected when:

[USB MODE SELECT] is set to [DEVICE] and this unit is connected to a PC. (

122

)

≥

When the [LCD/EVF OUTPUT] is set to [EVF], this item cannot be set. (

)

It adjusts brightness and color density on the LCD monitor.

Select the menu. (

)

Touch the desired setting item.

Touch

to adjust settings.

≥

You can select a value between

16 and

16.

Touch [RETURN].

≥

Touch [EXIT] to exit the menu screen.

≥

When the [LCD/EVF OUTPUT] is set to [EVF], this item cannot be set. (

)

[LCD BACKLIGHT]

: [DISP SETUP]

[LCD BACKLIGHT]

desired setting

[HIGH]/[LOW]

[LCD SET]

: [DISP SETUP]

[LCD SET]

[COLOR]:

Color level of the LCD monitor

[BRIGHTNESS]:

Brightness of the LCD monitor

[CONTRAST]:

Contrast of the LCD monitor

Summary of Contents for AG-DVX200AN












































































































































































































Search results

Summary of Contents for AG-DVX200AN

Reviews:

Panasonic AG-DVX200AN, Operating Instructions Manual, Page: 26 / 203

Search results

Summary of Contents for AG-DVX200AN

Reviews: