Panasonic AG-DVX200AN Operating Instructions Manual Download

Page: 12 / 203

- 12 -

∫

Attaching/detaching the lens hood

(How to detach the lens hood)

While pressing and holding the lens hood release button, rotate the lens hood in
the direction of the arrow to detach it.

(How to attach the lens hood)

Fit the lens hood into this unit.

≥

Align the mounting mark on the lens hood with the mounting mark on this unit.

Rotate the lens hood in the direction of the arrow.

≥

Rotate until it clicks into place.

Opening/closing the lens cover

You can open/close the lens cover by sliding the lens cover open/close lever.

≥

When this unit is not in use, close the lens cover to protect the lens.

≥

Do not press the lens cover hard. This may damage the lens or the lens cover.

≥

Depending on the various filters or the MC protector attached to the front side of this unit's lens,
you may not be able to open/close the lens cover or attach the lens hood.



Lens hood release button



Mounting mark

OPEN

Summary of Contents for AG-DVX200AN












































































































































































































Search results

Summary of Contents for AG-DVX200AN

Reviews:

Related manuals for AG-DVX200AN

Brands by name

Popular brands

Panasonic AG-DVX200AN, Operating Instructions Manual

Search results

Summary of Contents for AG-DVX200AN

Reviews:

Related manuals for AG-DVX200AN

Brands by name

Popular brands