Panasonic AG-DVX200AN Operating Instructions Manual Download

Page: 128 / 203

- 128 -

Copy selected files

Connect this unit to the external media device to prepare for copying. (

125

)

Touch [SELECT COPY].

≥

You can also access this function by selecting menu items.

[COPY]

[SELECT COPY]

Touch the media you want to copy.

≥

For information on copying between SD cards, refer to page

111

Touch the desired items following the instructions on the screen.

≥

It will return to the previous step by touching [Return].

≥

(When [SELECT SCENES] is selected)
When touched, the scene/still picture is selected and the

indication appears on the

thumbnail. Touch the scene/still picture again to cancel the operation.

≥

(When [SELECT DATE] is selected)
When touched, the date is selected and surrounded by red. Touch the date again to cancel the
operation.

≥

Up to 99 scenes/ 99 dates can be selected continuously.

Touch [EXIT] when the copy complete message is displayed.

≥

The thumbnail view of the copy destination is indicated.

When you stop copying halfway:

Touch [CANCEL] while copying.

[

When copying from the SD card 1 to the external media device.

[

When copying from the SD card 2 to the external media device.

Summary of Contents for AG-DVX200AN












































































































































































































Search results

Summary of Contents for AG-DVX200AN

Reviews:

Related manuals for AG-DVX200AN

Brands by name

Popular brands

Panasonic AG-DVX200AN, Operating Instructions Manual

Search results

Summary of Contents for AG-DVX200AN

Reviews:

Related manuals for AG-DVX200AN

Brands by name

Popular brands