Panasonic AG-DVX200AN Page 102 Operating Instructions Manual Download

Page: 102 / 203

- 102 -

(To set this unit to Still Picture Playback Mode)

Touch the still picture (JPEG)

Touch the scene or the still picture to be played
back.

≥

Next (Previous) page can be displayed by touching

Select the playback operation by touching the
operation icon.

* When touched twice, the fast forward/fast rewind speed increases. (Screen display will change to

Operation icon

≥

If you touch the screen while an operation icon is being
displayed or do not touch the icon for a certain period, it
will disappear. To display again, touch the screen.

Motion picture playback

Still picture playback

;

Playback/Pause

Fast rewind playback*

Fast forward playback*

∫

Stops the playback and shows the
thumbnails.

;

Slide show (playback of the still
pictures in numerical order) start/
pause.

Plays back the previous picture.

Plays back the next picture.

∫

Stops the playback and shows the
thumbnails.

ヮヱフ



UHD

TC 00:02:30.00



Summary of Contents for AG-DVX200AN












































































































































































































Search results

Summary of Contents for AG-DVX200AN

Reviews:

Related manuals for AG-DVX200AN

Brands by name

Popular brands

Panasonic AG-DVX200AN, Operating Instructions Manual

Search results

Summary of Contents for AG-DVX200AN

Reviews:

Related manuals for AG-DVX200AN

Brands by name

Popular brands