Panasonic AG-DVX200AN Operating Instructions Manual Download

Page: 74 / 203

- 74 -

≥

[TCG] will be set to [FREE RUN].

(On the slave device)

Press the RESET/TC SET button.

≥

[TC LINK OK] will be displayed and the time code will be synchronized with that of the master
device.

≥

When the time code is not synchronized correctly, [TC LINK NG] is displayed.

≥

To cancel the operation without synchronizing the time code, touch [EXIT].

≥

Use a commercially-available, double-shielded BNC cable equivalent to 5C-FB.

≥

[EXT TC LINK] cannot be set to [SLAVE] in the following cases:

In Variable Frame Rate Mode (

)

During the Interval Recording (

162

)

Each of the USER button can register one function from the 38 available functions.

≥

There are eight USER buttons (USER1 to USER8) on the main body and four USER button icons
(USER9 to USER12) displayed on the LCD monitor.

Setting the USER button

Select the menu.

≥

It is not possible to register functions to [USER9] to [USER12] in Playback Mode.

Touch the item to register.

≥

For the functions of the USER button that can be registered, refer to page

≥

Touch [INHIBIT] if not registering.

≥

Next (Previous) page can be displayed by touching

Touch [EXIT] to complete the setting.

≥

The tables below show the default settings.

≥

Performing [ALL] in [INITIAL SET] restores these default settings. (

178

)

: [RECORD SETUP]

[EXT TC LINK]

[SLAVE]

Recording

USER button

: [USER SW]

[USER1] to [USER12]

USER1 button

[DRS]

USER7 button

[WFM]

USER2 button

[ATW]

USER8 button

[REC CHECK]

USER3 button

[BACKLIGHT]

USER9 button

[FRZ FRAME]

USER4 button

[FOCUS MACRO]

USER10 button

[EVF/LCD DETAIL]

USER5 button

[O.I.S.]

USER11 button

[ATW LOCK]

USER6 button

[ZEBRA]

USER12 button

[MENU]

Summary of Contents for AG-DVX200AN












































































































































































































Search results

Summary of Contents for AG-DVX200AN

Reviews:

Related manuals for AG-DVX200AN

Brands by name

Popular brands

Panasonic AG-DVX200AN, Operating Instructions Manual

Search results

Summary of Contents for AG-DVX200AN

Reviews:

Related manuals for AG-DVX200AN

Brands by name

Popular brands